SmartLine Complete Space Derby® Timer Details

• Timer unit:
  • all communication features are ENABLED
  • Embedded USB or Serial output version
• Communication Cables included for options selected above in the dropdowns:
  • Serial output:
    • Serial cable
    • USB to Serial Converter
  • USB output:
    • USB cable
    • 35' USB EXTENSION cable
• Displays: Single or Double sided avaliable for all of the options below.

  Display Options

  Placement display only - Large 2.25" Digit.
  

  Placement and Time display with 4 decimal .56" time display on both sides.
  We listened and delivered this new improved version of the display with the time on BOTH SIDES.
  

  Introducing the new Alternating Time/Place displays with 4 decimals.
  Available soon.
  Time has 5 digits (1.2345) .8" high display.
  

• 12V Power Adaptor
• Spacer tubes used as stoppers. The plane hits the tube and the tube presses the switch on the sensor.
• Reset/Start gate switch clamp is included to hold the switch in place at the start gate. You may also mount it more permanently with screws or bolts to your track.
• Self-stick velcro straps are included to secure the timer onto the finish section of the track. The timer sits on the 3" bolts but the velcro straps ensure that it won't fall off if the track is bumped.
• Electrical tape is included to hold the communication and start gate wires to the finish section of the track. It is important to secure the wires so that the timer won't be pulled off if the wires are tripped over. It's a good idea to secure the wires to the floor also.
• Start gate switch & reset assembly bracket and 50' Start gate cable. You need the start switch attached if you want the timer to display the times from when the cars/planes begin. If the start switch is not connected, the time of the first car will be 0.0000 and the timer will be started. Every car after that will show the time after the first car/plane.